Beta Software ER605 V2_2.1.5 Build 20231024 Beta Firmware for Omada Controller V5.11 (Released on Oct 26th, 2023)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This Article Applies to
ER605(UN) V2 2.1.5_Build 20231024 (Beta)
Release Notes:
New Features & Enhancements:
1. Add ACL support for IPv6 data.
2. Add support for IPv6 RA (Router Advertisement) configuration for LAN.
3. Add support for configuring multiple IP addresses on the WAN port.
4. Add support for monitoring session limits in controller mode.
5. Add support for configuring the MSS (Maximum Segment Size) of WAN port.
6. Add support for Gateway Tools in Controller mode.
- Ping.
- Traceroute.
- Terminal.
7. Add support for the ability to download device info of Gateway in Controller mode.
8. Add support for Location Group in Gateway ACL.
9. Add support for white list of MAC filtering in Controller mode.
10. Add support for tagging same VLAN ID on different WAN port.
11. Increased security of communication between Gateway and Controller.
12. Add support for DNS cache, which can improve domain name resolution speed by handling recent address resolutions locally before sending request to Internet .
13. Add support for DH 14 and DH 15 for PFS.
14. Add support for 0.0.0.0/0 IP range of local network when using IPsec IKEv2 for Client-to Site VPN.
15. Add support for DDNS custom intervals (1~60 minutes).
16. Add support for link-local addresses of IPv6 DNS on the LAN side.
17. Log Enhancements.
- Show the source IP address of TCP no-Flag /ping of death attacks.
- Show the log of link backup switching.
- Show the log of DDNS update.
- Logs can be saved when the device is down. You need to short-press the reset button within 5s, and after releasing the reset button, the sys light will be on for 3 seconds to indicate that the downtime log is saved successfully.
Bug Fixed:
1. Fix the bug that ICMP type 13 packets cannot be intercepted.
2. Fix the bug that VPN Client cannot access the other side through IPsec when the device act as a PPTP/L2TP/OpenVPN Server and also establishes IPsec VPN with other devices.
3. Fix the bug that VPN client cannot proxy Internet access when VPN IP Pool and LAN IP are in the same network segment.
4. Fix the bug of CPU abnormality caused by enabling more VLAN Interface.
5. Fix the bug of high latency in ISP Load in Controller mode.
6. Fix the bug of frequent reconnection with Omada Controller.
7. Fix the bug that the VLAN configuration of IPTV is affected by the VLAN configuration of WAN port in Controller mode.
8. Fix the bug that the device does not support proxy internet access as Wireguard VPN client.
9. Fix the bug that Port Forwarding does not take effect under multiple WAN ports.
10. Fix the bug that new clients might lose Internet when bandwidth control is configured.
11. Fix the bug that Internet/DNS resolving might not work when using OpenVPN Connect App/Software to connect to the Router’s OpenVPN Server.
12. Fix the bug that the device as an OpenVPN client failed to make all the Internet traffic be routed through the VPN tunnel.
13. Fix the bug that remote IP error displayed in the OpenVPN Tunnel interface when the device connects successfully as an OpenVPN Client.
14. Fix the bug that after the device connects to the Server as a WireGuard VPN Client, the peer cannot access the device via WireGuard Interface IP.
15. Fix the bug of command injection vulnerability in the login page.
16. Fix the bug that the device may not start.
17. Fix the bug that when DOH/DOT used with DNS cache, modifying the TTL value of DNS cache will cause the client to be unable to access the Internet.
18. Fix the bug that port forwarding probabilistically did not work.
19. Fix the bug that when the device is used as an OpenVPN client, the VPN tunnel cannot be reconnected automatically when it times out.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Gateways
Firmware Download Link
ER605(UN) V2_2.1.5_Build 20231024 (Beta)
Notes:
(1) The above firmware is applied to ER605 V2/2.6.
(2) Your device’s configuration won’t be lost after upgrading.
Additional Information
All feedback is welcome, including letting us know about successful device upgrades.
If somehow you encounter an issue during or after the ER605 router upgrade, it's suggested to contact us with the following info:
- Omada Controller version
- Device Firmware version with Build number (previous and current)
If your ER605 router gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.
How to use the Emergency Mode to recover the firmware for Omada Gateways
Update Log
Nov. 20th, 2023:
Update the format and incorrect description in the release note.
Oct. 26th, 2023:
Post the ER605 V2 2.1.5_Build 20231024 (Beta) firmware for early access.
Recommended Threads
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks for posting in our business forum.
Artur.Aragao wrote
@Clive_A
Please correct? Incorrect information
Have corrected it. Bear my stupid fingers.
- Copy Link
- Report Inappropriate Content
Hi @phongtom
Thanks for posting in our business forum.
phongtom wrote
I found a bug: When adding OpenVPN client, the remote server field only accepts IP, not domain name.
First, it is not a bug.
Second, it has not supported FQDN in the Controller mode ever since the OVPN was added to the controller as a new feature. You probably should ask this in the controller section.
In the standalone, it was supported a long time ago if I did not recall it wrong.
- Copy Link
- Report Inappropriate Content
@Clive_A I am talking about standalone mode. The remote server string in .ovpn file is ignored and the ER605 try to connect to the IP filled in Remote server field.
- Copy Link
- Report Inappropriate Content
Friend,
Good morning!
Did you try to apply the new 2.2.2 for the ER605 V2?
It came out in October. Strangely and unlike what happened with my EAP670, this time it did not report this final update in the device items. I've already updated and everything seems to be OK, but I don't know what you said.
- Copy Link
- Report Inappropriate Content
V1 is EOL so maybe only critical security updates will be released, no more new features or bug fixes.
- Copy Link
- Report Inappropriate Content
Thanks.
It happens.
Simpler users may end up confused.
That's why I just informed you.
Thank you very much for your usual kindness.
- Copy Link
- Report Inappropriate Content
Hi @pduchnovsky
pduchnovsky wrote
@Clive_A Would you guys mind updating also ER605 V1, thanks.
Thanks for posting in our business forum.
https://community.tp-link.com/en/business/forum/topic/634790?replyId=1279256
Very unlucky, it cannot be done now. Please see the explanation from others.
Would recommend you upgrade to the newer version or products for a better experience and up-to-date firmware.
- Copy Link
- Report Inappropriate Content
@Clive_A Will the ER605 V2 support DPI (ips features) that are coming out in the controller version 5.13.x? We have a need to block torrent usage in our network (a hotel). I have residents that try to torrent illegal content like movies and we could lose our internet services.
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
OrangeStreet wrote
@Clive_A Will the ER605 V2 support DPI (ips features) that are coming out in the controller version 5.13.x? We have a need to block torrent usage in our network (a hotel). I have residents that try to torrent illegal content like movies and we could lose our internet services.
I am not informed ahead about the features of the firmware. So I am not able to answer this question. All depend on its beta or official release.
- Copy Link
- Report Inappropriate Content
ER605 still not changing next server address with option 66 as of this release - I know this was fixed on the E7206 earlier this year - do we know if this is on the 'list' to fix for the 605 at some point?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 13278
Replies: 59
Voters 0
No one has voted for it yet.