cant configure to permit vlan on tcp port 1514 for logging
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello, I can't seem to figure out how to send logs across the lands that are isolated via ACL rules. I just need to open a specific port IE 1514 from all the vlans into one VLAN.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @kevin-g
Thanks for posting in our business forum.
GW IP-Port ACL is not available yet. This feature has been submitted to the dev team. Please wait for future firmware updates.
The workaround now is that if you have Switch, you can use Switch ACL instead. Note 7212 is not a switch.
Update: GW IP-ACL ETA is V5.15.
Disclaimer: This information serves as a reminder that the estimated date provided is purely for informational purposes and should not be regarded as a definitive or binding commitment from our team. Please note that the release of this feature may be subject to advancement or delay depending on various factors, including but not limited to the version number specified.
- Copy Link
- Report Inappropriate Content
Hi @kevin-g
Thanks for posting in our business forum.
GW IP-Port ACL is not available yet. This feature has been submitted to the dev team. Please wait for future firmware updates.
The workaround now is that if you have Switch, you can use Switch ACL instead. Note 7212 is not a switch.
Update: GW IP-ACL ETA is V5.15.
Disclaimer: This information serves as a reminder that the estimated date provided is purely for informational purposes and should not be regarded as a definitive or binding commitment from our team. Please note that the release of this feature may be subject to advancement or delay depending on various factors, including but not limited to the version number specified.
- Copy Link
- Report Inappropriate Content
Thanks for your response. I get access to switch acls, but those rules are invalid, my gw acl is only running right now?
Total tp link noob. Used to my old ciscos.
Clive_A wrote
Hi @kevin-g
Thanks for posting in our business forum.
GW IP-Port ACL is not available yet. This feature has been submitted to the dev team. Please wait for future firmware updates.
The workaround now is that if you have Switch, you can use Switch ACL instead. Note 7212 is not a switch.
- Copy Link
- Report Inappropriate Content
Hi @kevin-g
Thanks for posting in our business forum.
kevin-g wrote
Thanks for your response. I get access to switch acls, but those rules are invalid, my gw acl is only running right now?
Total tp link noob. Used to my old ciscos.
Clive_A wrote
Hi @kevin-g
Thanks for posting in our business forum.
GW IP-Port ACL is not available yet. This feature has been submitted to the dev team. Please wait for future firmware updates.
The workaround now is that if you have Switch, you can use Switch ACL instead. Note 7212 is not a switch.
Of course, the SW ACL is not working if you don't have a TP-Link Omada switch.
If you have GW ACL, that is the only thing you can do.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 415
Replies: 3
Voters 0
No one has voted for it yet.