Hi support,

I have both desktop and notebook connected (via wire) to ER7212PC (latest FW @ v1.1.1) configured fresh from a factory reset.

Desktop -> port #6 -> 192.168.0.100 (default network)

Notebook -> port #12 -> 192.168.10.2 (manually created network with VLAN ID @ 10)

However, both desktop and notebook unable to ping each other (without any ACL setup). All the above IPs are issued by it's respective DHCP.

Troubleshooting

I connect my notebook to port #6 and get assigned with 192.168.0.101. In this scenario, both parties are able to ping each (as expected since same subnet).

Desktop @ 192.168.0.100 able to ping the gateway @ 192.168.10.1

Notebook @ 192.168.10.2 able to ping the gateway @ 192.168.0.1

Further testing

Created ACL:

• Gateway / LAN-LAN / Permit / All protocol / Bi-directional
• Switch / Permit / All protocol / Bi-directional

Still, I'm unable to ping either direction with the ACL enabled.

Any other methods/setup that I overlook?

Thanks