ACL - Allowing one port access a blocked VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ACL - Allowing one port access a blocked VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ACL - Allowing one port access a blocked VLAN
ACL - Allowing one port access a blocked VLAN
2024-03-24 16:23:53
Model: TL-SG2428P  
Hardware Version:
Firmware Version:

Hi,

My hardware setup: ER605, OC200, SG2428P, and some AP.

 

I created few VLANs, that seems to work fine ( ADMIN, CAM, IOT, PC).

An ACL was created to block any communication from all othen VLANs.

But, since my MQTT broker (192.168.30.4) belongs to IOT VLAN (192.168.30.1/24), I wish to give it an access to ADMIN VLAN (192.168.0.1/24).

 

All "Permit" Switch ACL is blocking the MQTT broker.

 

Can it be done ?

Guy

 

  0      
  0      
#1
Options
1 Reply
Re:ACL - Allowing one port access a blocked VLAN
2024-03-25 06:32:31

Hi @guyd2 

Thanks for posting in our business forum.

There are some good posts from warm-hearted people on the forum which you should take a look.

You asked something similar to this one.

https://community.tp-link.com/en/business/forum/topic/656428?replyId=1329186

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options