EAP615-Wall (1.2.4) not detected as mesh uplink AP by EAP650 and EAP610-Outdoor

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP615-Wall (1.2.4) not detected as mesh uplink AP by EAP650 and EAP610-Outdoor

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP615-Wall (1.2.4) not detected as mesh uplink AP by EAP650 and EAP610-Outdoor
EAP615-Wall (1.2.4) not detected as mesh uplink AP by EAP650 and EAP610-Outdoor
2024-03-25 09:41:35 - last edited 2024-03-26 07:44:09
Model: EAP615-Wall  
Hardware Version: V1
Firmware Version: 1.2.4

Currently have an EAP650 and EAP610-Outdoor that are connected via mesh to another EAP650 on the main network. This uplink EAP650 is some distance away from these devices but there are two EAP615-Wall's that are quite a bit closer I would prefer they connect to. I have updated the firmware of the 615's to the new 1.2.4 with mesh support and confirmed that the 'Mesh' tab appears in the controller view but they aren't being detected as uplink APs.

 

I have rescanned for mesh devices on both of the devices and the 615's don't appear. Can anyone confirm if these models are known to work together yet or am I hitting an issue with the new mesh support in the EAP615-Wall firmware?

  0      
  0      
#1
Options
1 Accepted Solution
Re:EAP615-Wall (1.2.4) not detected as mesh uplink AP by EAP650 and EAP610-Outdoor-Solution
2024-03-26 06:48:28 - last edited 2024-03-26 07:44:09

 

qdolan wrote

Currently have an EAP650 and EAP610-Outdoor that are connected via mesh to another EAP650 on the main network. This uplink EAP650 is some distance away from these devices but there are two EAP615-Wall's that are quite a bit closer I would prefer they connect to. I have updated the firmware of the 615's to the new 1.2.4 with mesh support and confirmed that the 'Mesh' tab appears in the controller view but they aren't being detected as uplink APs.

 

I have rescanned for mesh devices on both of the devices and the 615's don't appear. Can anyone confirm if these models are known to work together yet or am I hitting an issue with the new mesh support in the EAP615-Wall firmware?

Hi @qdolan 

Please try to change the 5GHz channel of EAP615-Wall to band 1 (36, 40, 44, 48) manually, and rescan the uplink EAP. 

 

If the EAP615-Wall is still invisible, please confirm what is your controller version, the network topology and network environment etc. Thanks for your patience.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:EAP615-Wall (1.2.4) not detected as mesh uplink AP by EAP650 and EAP610-Outdoor-Solution
2024-03-26 06:48:28 - last edited 2024-03-26 07:44:09

 

qdolan wrote

Currently have an EAP650 and EAP610-Outdoor that are connected via mesh to another EAP650 on the main network. This uplink EAP650 is some distance away from these devices but there are two EAP615-Wall's that are quite a bit closer I would prefer they connect to. I have updated the firmware of the 615's to the new 1.2.4 with mesh support and confirmed that the 'Mesh' tab appears in the controller view but they aren't being detected as uplink APs.

 

I have rescanned for mesh devices on both of the devices and the 615's don't appear. Can anyone confirm if these models are known to work together yet or am I hitting an issue with the new mesh support in the EAP615-Wall firmware?

Hi @qdolan 

Please try to change the 5GHz channel of EAP615-Wall to band 1 (36, 40, 44, 48) manually, and rescan the uplink EAP. 

 

If the EAP615-Wall is still invisible, please confirm what is your controller version, the network topology and network environment etc. Thanks for your patience.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
Re:EAP615-Wall (1.2.4) not detected as mesh uplink AP by EAP650 and EAP610-Outdoor
2024-03-26 07:41:02

Hank21 wrote

 

Hi @qdolan 

Please try to change the 5GHz channel of EAP615-Wall to band 1 (36, 40, 44, 48) manually, and rescan the uplink EAP. 

 

If the EAP615-Wall is still invisible, please confirm what is your controller version, the network topology and network environment etc. Thanks for your patience.

  @Hank21 That seems to fix it. Thanks.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 644

Replies: 2

Related Articles