EAP225 instead of EAP610 connecting via mesh - How to force EAP610?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have 2 EAP610-Outdoor's and and an EAP225- Outdoor.... One EAP610 is close to my other one, but not wired to the 610, and the EAP225 is wired to the EAP610.... so this:
EAP610 (((- wireless EAP610----wired---EAP225
When I reboot them, sometimes the EAP225 connects to the toot EAP610 as mesh, and the EAP610 gets a 'wired' connection from the EAP225... I want the EAP225 to get the wired connection from the EAP610, and the EAP610 to get the mesh connection from the root EAP610....
Without disconnecting the wire to the EAP225, how can I force the EAP610's to mesh, and the EAP225 to adopt via the wire to the EAP610?
I would try configuring the root610 and connected225 with different fixed 5G channels, and the mesh610 with the same channel as the root610. Even if they come up in the wrong order, once adopted and configured by the controller, order should return. In newer controllers, you can also set the 'Priority Uplink' star.
