SWITCH DOESNT RECOGNISE ROOT PORT WHEN CONNECT WITH HUAWEI SWITCH
Hi we have connect tplink switch with huawei switch in rstp. When we connect tp link with huawei , tp link doesn't recognise root port.
Eg.
Port 4 is connected with huawei port shows designated.
But when maipu come in between tplink and Huawei , same port no. 4 shows as root and other at designated.
We tried multiple settings but doesn't work.
We have 2 switches both have same problem
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Maximums
Thanks for posting in our business forum.
Does the RSTP work properly between two TP-Link switch?
It could be a compatible issue with Huawei. But we need some time before I submit a test.
I don't understand your "does not recognize" root meaning. Please be specific about this part. I tested two Omada switches and I don't think I see the issue here.
- Copy Link
- Report Inappropriate Content
@Clive_A thank you for Replying.
We are an isp and we have arround 30+ switches in RSTP.
we have Huawei switch as core Switch.. when we connect Tplink with Huawei switch say huawei port 1 to tplink port 1. Port gets up but it shows port role Designated on tplink port1. the same port should become Root.
when i connect maipu or edgcore switch in between huawei and tplink .. port 1 on tplink becomes port role Root.
kindly give us a solution over this ...
- Copy Link
- Report Inappropriate Content
Hi @Maximums
Thanks for posting in our business forum.
Maximums wrote
@Clive_A thank you for Replying.
We are an isp and we have arround 30+ switches in RSTP.
we have Huawei switch as core Switch.. when we connect Tplink with Huawei switch say huawei port 1 to tplink port 1. Port gets up but it shows port role Designated on tplink port1. the same port should become Root.
when i connect maipu or edgcore switch in between huawei and tplink .. port 1 on tplink becomes port role Root.
kindly give us a solution over this ...
Change the priority of the RSTP on the TP-Link. Will it be recognized as the Root?
The priority of other vendors might be higher than our default value. That might be the case where you see a different result.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 337
Replies: 3
Voters 0
No one has voted for it yet.