Business Community > All Threads > Unable to Establish Internet Connectivity between ER605 V2 & Archer AX1500
< All Threads

Unable to Establish Internet Connectivity between ER605 V2 & Archer AX1500

Unable to Establish Internet Connectivity between ER605 V2 & Archer AX1500

Unable to Establish Internet Connectivity between ER605 V2 & Archer AX1500
Unable to Establish Internet Connectivity between ER605 V2 & Archer AX1500
2024-04-29 15:52:19 - last edited 2024-07-29 01:42:35
Tags: #Load Balancing #WAN Setup
Model: ER605 (TL-R605)   Archer AX1500  
Hardware Version: V2
Firmware Version: ER605(UN)_V2.6_2.2.4 Build 20240119

Hello,

 

Recently, I purchased an ER605 V2.

Previously, I had an AX1500 router.

 

It is for my home setup of the Wi-Fi Network.

 

I have two ISP providers (Airtel & Jio).

I also wanted load-balancing, so I purchased an ER605.

 

When I tried to set up ER605 without the Omada Controller Software directly accessing it with 192.168.0.1, I saw that the status link was up for my two ISPs.

Then, I connected the AX1500 router with ER605 and the RJ45 cable. On ER605, I used one LAN port, and on AX1500, I used the WAN port for physical connection.

But the internet connection isn't established on my AX1500.

 

Later, I reset the factory and tried to configure it with the Omada Software Controller software.

After the website was created, when I went to adopt the gateway from the unknown list, it did not show AX1500. Also, adoption was failing. 

Then again, it restarts the adoption process, showing connected. After a few seconds, it shows provisioning and asks to reboot ER605 in the action column.

When trying to reboot, it's saying configuration is not successful. And not showing as the connected device.

 

I am clueless about how to integrate ER605 with AX1500.

The setup manual is for standalone mode, so I followed that, but the internet is not connected to my AX1500 router.

I used a quick setup on AX1500. 

 

 

Please help me.

 

 

 

 

 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Unable to Establish Internet Connectivity between ER605 V2 & Archer AX1500-Solution
2024-04-30 03:04:08 - last edited 2024-07-29 01:42:35

Hi @Sumanta 

Thanks for posting in our business forum.

1. For the step-by-step walkthrough, call your local support number.

2. We did not advertise AX1500 would be compatible with the Omada. Omada is a separate series and brand of the business product line. So, you don't find AX1500 on the Omada controller for certainty.

3. It does not ask you to reboot proactively. Don't click the button unless you know what you are doing. What you did is manually reboot your device. I don't know why you did that.

4. I recommend you read the User Guide of the Omada Controller from the official website. Modem > WAN_ER605_LAN > WAN_AX1500.

Or set up your AX1500 as the AP mode. For the steps, please contact the home support.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:Unable to Establish Internet Connectivity between ER605 V2 & Archer AX1500-Solution
2024-04-30 06:46:52 - last edited 2024-07-29 01:42:37

  @Sumanta 

 

I am clueless about how to integrate ER605 with AX1500.

The setup manual is for standalone mode, so I followed that, but the internet is not connected to my AX1500 router.

I used a quick setup on AX1500

 

The problem is almost certainly that the AX1500 LAN IP subnet is the same as the ER605 ( 192.168.0.x ). If you wish to use the AX1500 in router mode you will need to change its LAN IP subnet OR as @Clive_A  says change the AX1500 to Access Point Mode ( page 18 of the manual )

 

Recommended Solution
  1  
  1  
#3
Options
3 Reply
Re:Unable to Establish Internet Connectivity between ER605 V2 & Archer AX1500-Solution
2024-04-30 03:04:08 - last edited 2024-07-29 01:42:35

Hi @Sumanta 

Thanks for posting in our business forum.

1. For the step-by-step walkthrough, call your local support number.

2. We did not advertise AX1500 would be compatible with the Omada. Omada is a separate series and brand of the business product line. So, you don't find AX1500 on the Omada controller for certainty.

3. It does not ask you to reboot proactively. Don't click the button unless you know what you are doing. What you did is manually reboot your device. I don't know why you did that.

4. I recommend you read the User Guide of the Omada Controller from the official website. Modem > WAN_ER605_LAN > WAN_AX1500.

Or set up your AX1500 as the AP mode. For the steps, please contact the home support.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:Unable to Establish Internet Connectivity between ER605 V2 & Archer AX1500-Solution
2024-04-30 06:46:52 - last edited 2024-07-29 01:42:37

  @Sumanta 

 

I am clueless about how to integrate ER605 with AX1500.

The setup manual is for standalone mode, so I followed that, but the internet is not connected to my AX1500 router.

I used a quick setup on AX1500

 

The problem is almost certainly that the AX1500 LAN IP subnet is the same as the ER605 ( 192.168.0.x ). If you wish to use the AX1500 in router mode you will need to change its LAN IP subnet OR as @Clive_A  says change the AX1500 to Access Point Mode ( page 18 of the manual )

 

Recommended Solution
  1  
  1  
#3
Options
Re:Unable to Establish Internet Connectivity between ER605 V2 & Archer AX1500
2024-07-27 06:38:57

  @MisterW 
what I'm understanding from your messages you want to configure the ER605 and then your router AX1500 so these are the steps you can follow which I did in my setup to

  1. Initial Setup:

    • Ensure your two ISP connections are connected to the ER605 load balancer.
    • Connect the ER605 to your router.

  2. Change the Router IP Address:

    • Navigate to the router settings:
      • Go to Advanced -> Network -> LAN.
      • Change the IP Address to 10.0.0.1 (This is your choice what IP you wanna have in your router this is as an example).
      • Set the Subnet Mask to 255.255.0.0.

  3. Configure the Internet Connection Type:

    • Navigate to Advanced -> Network -> Internet.
    • Set the Internet Connection Type to Dynamic IP.
    • In the MAC Clone section, select Use Default MAC Address.

  4. Enable DHCP on the Load Balancer:

    • Make sure your ER605 load balancer is set up and configured.
    • Navigate to the Network -> LAN settings on the ER605.
    • Enable the DHCP server so that the router receives an IP address.

  5. Assign a Permanent IP Address to the Router:

    • Once the router receives an IP address from the DHCP server, you can assign a permanent IP address to it in the next tab in the ER605.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 387

Replies: 3

Tags

Load Balancing WAN Setup
Related Articles
OC200 unable to establish connection?
978 0
Unable to re-establish Cloud Access
611 0
Unable to access LAN Resource after VPN establish
939 0
Will the system work without Internet connectivity
3547 0
Failed to detect internet connectivity - Er605
678 0
Unable to get stable connection to the Internet via WAN port
539 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.