Hello,

I suddenly have the following problem:

My NAS is connected to port 2.
This is located in VLAN 10. VLAN 10 is therefore configured untagged for port 2.

Docker Images are running on the NAS. To do this, I configured a network MacVLAN for VLAN 1 there.
Port 2 is therefore additionally tagged for VLAN 1.
The images receive an IP address from VLAN 1 and are reachable.

Then I tested an access point on port 13, configuring VLAN 1 as untagged and VLAN 10, 20 and 30 tagged.
However, the access point did not receive an IP. I then undid everything and now the virtual machines no longer receive an IP.
Access points are still connected to ports 22 and 23, VLAN 1 untagged, 10, 20 and 30 tagged. Everything still works here.

I don't understand why it doesn't work on port 2.

Bests Regards

Robert