Discovery of Access Points over Site-to-Site VPN

Discovery of Access Points over Site-to-Site VPN

Discovery of Access Points over Site-to-Site VPN
Discovery of Access Points over Site-to-Site VPN
2024-05-17 10:59:17 - last edited 2024-05-20 01:45:27
Model: OC200  
Hardware Version:
Firmware Version: 2.11.3 Build 20230906 Rel.36272

Hi,

We have a site-to-site VPN tunnel set up bewtween two non-tplink Routers which links a Head office to a factory. Currently the Controllers and 6 AP's are based at the factory site. I've just added an EAP 265 to the Head office, however the controller at the factory cannot discover it.

 

 

Are there any work arounds please? Can it be manuallty added in some way?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Discovery of Access Points over Site-to-Site VPN-Solution
2024-05-20 01:45:18 - last edited 2024-05-20 01:45:27

Hi  @FCL1970 

 

Please refer to this Guide:

How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)

FCL1970 wrote

Hi,

We have a site-to-site VPN tunnel set up bewtween two non-tplink Routers which links a Head office to a factory. Currently the Controllers and 6 AP's are based at the factory site. I've just added an EAP 265 to the Head office, however the controller at the factory cannot discover it.

 

 

Are there any work arounds please? Can it be manuallty added in some way?

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:Discovery of Access Points over Site-to-Site VPN
2024-05-17 11:15:24 - last edited 2024-05-17 11:25:17

  @FCL1970 

 

use dhcp option 138 or omada discovery utility.

you can also manuel add it from web interface on access point.

 

 

 

 

  2  
  2  
#2
Options
Re:Discovery of Access Points over Site-to-Site VPN-Solution
2024-05-20 01:45:18 - last edited 2024-05-20 01:45:27

Hi  @FCL1970 

 

Please refer to this Guide:

How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)

FCL1970 wrote

Hi,

We have a site-to-site VPN tunnel set up bewtween two non-tplink Routers which links a Head office to a factory. Currently the Controllers and 6 AP's are based at the factory site. I've just added an EAP 265 to the Head office, however the controller at the factory cannot discover it.

 

 

Are there any work arounds please? Can it be manuallty added in some way?

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 314

Replies: 2

Related Articles