How to configure Wake on LAN across VLAN's

How to configure Wake on LAN across VLAN's

How to configure Wake on LAN across VLAN's
How to configure Wake on LAN across VLAN's
2024-06-22 19:21:09
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.5 Build 20240522 Rel.75860

I  recently upgraded my network with an ER605 router and SG3428MP v6.20  managed switch. I did this primarily so I could isolate computers in separate VLAN's. Since I did this set up I can no longer get Wake On LAN to function across VLAN's. When I had all my devices on the same network WOL worked well. What do I need to do to configure this TP-Link hardware to broadcast WOL packets across VLAN's? I do have firewall rules to keep computers from accessing each other VLAN's.

 

Any help is greatly appreciated.

  1      
  1      
#1
Options
1 Reply
Re:How to configure Wake on LAN across VLAN's
2024-06-23 11:14:59

Hi  @Entirelynutz 

Since you set up VLAN interface and use ACL, IP-Port ACL for GW is not available yet. I think it is not possible to make it work pretty well at this moment.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options