Home

Forums

Stories

Knowledge Base

Business Community > All Threads > Could Omada switches work without Omada software (OC200)?

< All Threads

Could Omada switches work without Omada software (OC200)?

Could Omada switches work without Omada software (OC200)?

Could Omada switches work without Omada software (OC200)?

2024-08-03 14:49:58 - last edited 2024-08-05 02:09:16

Posts: 8

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-03-14

Could Omada switches work without Omada software (OC200)?

2024-08-03 14:49:58 - last edited 2024-08-05 02:09:16

Tags: #VLAN & Multi-Networks #PoE #Network Connectivity

Model: TL-SG2428P

Hardware Version: V1

Firmware Version: 1

Could Omada switches work without Omada software? i ask this because in the past i had the opposite, i had a TPlink 1600 switch and it dit always block the network because the router dit block his own ip adres to 192.168.0.1 and the router must always be on 0.1 (as otherwise you miss some devices)

I have a 605 (2) router and a AP653 on the same network.

For this moment i have a SG2428P But it makes to much noice (as i sleep about 1,5 meter from the switch). So i am planned to buy a Switch without Poe (so no noisy fans)

0

0

#1

1 Accepted Solution

2024-08-05 02:09:13 - last edited 2024-08-05 02:09:16

Posts: 4984

Helpful: 2308

Solutions: 1102

Stories: 0

Registered: 2023-06-09

Re:Could Omada switches work without Omada software (OC200)?-Solution

2024-08-05 02:09:13 - last edited 2024-08-05 02:09:16

Thanks for posting in our business forum.

The Omada switch can work without the Omada Controller. It can be a separate device like the T1600 which you used to have. The interface would be similar if you are using the new GUI.

Anyway, the switch can also get back into the Omada integration and use it with the Controller. The choice is yours.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. Don't be a lazy asker. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Recommended Solution

1

1

#2

1 Reply

2024-08-05 02:09:13 - last edited 2024-08-05 02:09:16

Posts: 4984

Helpful: 2308

Solutions: 1102

Stories: 0

Registered: 2023-06-09

Re:Could Omada switches work without Omada software (OC200)?-Solution

2024-08-05 02:09:13 - last edited 2024-08-05 02:09:16

Thanks for posting in our business forum.

The Omada switch can work without the Omada Controller. It can be a separate device like the T1600 which you used to have. The interface would be similar if you are using the new GUI.

Anyway, the switch can also get back into the Omada integration and use it with the Controller. The choice is yours.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. Don't be a lazy asker. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Recommended Solution

1

1

#2

2024-08-03 14:49:58 - last edited 2024-08-05 02:09:16

Posts: 8

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-03-14

Information

Helpful: 0

Views: 145

Replies: 1

Tags

VLAN & Multi-Networks PoE Network Connectivity