Omada 605 PPTP client dont reconnect automatically
Omada 605 PPTP client dont reconnect automatically
Hi
I have pptp client problem with my omada 605,
pptp client ID 1 always reconnects after disconnect but client ID 2 not.
i need every day disable-enable pptp connection via omadas gui for reconnect.
even my old asus router can automatically reconnect as pptp client but tplink not??
is there any setting for auto-reconnect vpn client?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Clive_A Hi,
ER605_un_2.2.6_20241111-rel57697_common_v2_debug_up_2024-11-12_10.03.10
problem is fixed.
Testing this firmware for 8 days: tens of restarts, simulatenous and one by one restarts of both pptp servers, er 605 client always reconnected.
biggest surprise was today, when remote pptp server powered off
Nov 20 13:04:56 ER605: 2024-11-20 13:04:56 ppp<5>: [OMADA]WAN2: MPPE disabled: terminating link!
....
4+Hours of reonnect retries until remote pptp serve turned on and tens of messages pptp<5>: WAN2: PPTP client began connecting.
....
Nov 20 17:01:11 ER605: 2024-11-20 17:01:11 ppp<5>: [OMADA]10.2.0.1155: PPTP Client yuriyvpn connected to the server successfully.
thanks tp-link. please add this fix to next stable update.
- Copy Link
- Report Inappropriate Content
To anyone who reads this:
The solution firmware is listed here:
- Copy Link
- Report Inappropriate Content
Hi @YuriyB
Thank you so much for taking the time to post the issue on TP-Link community!
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID240849617, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
I have two identical PPTP servers on other brand routers with tens of IP cams connected ,)
192.168.2.1 and 192.168.3.1 with scheduled restart at 06:00 and 06:06AM
My er605 automatically reconnect as PPTP CLIENT only on second PPTP server 192.168.3.1
So i need Disable-Enable it in web ui and it immediately reconnects, appearing in tunnel list.
- Copy Link
- Report Inappropriate Content
@YuriyB Today is 28th of august. er605 dont try reconnect for two days.
i can connect to pptp vpn in windows. no problem with pptp server it is online.
nut omada even not trying to reconnect!
last log:
2024-08-26 16:25:14 pptp[28772]: <5> 08114106 WAN1: PPTP client was disconnected.
2024-08-26 16:25:14 ppp[28772]: <4> 02313123 [OMADA]WAN1: LCP sending TERMINAL-REQUEST timeout.
2024-08-26 16:25:11 pptp[28772]: <5> 08114104 WAN1: PPTP client failed to connect the server.
2024-08-26 16:25:11 ppp[28772]: <5> 02313117 [OMADA]WAN1: MPPE disabled: terminating link!
- Copy Link
- Report Inappropriate Content
manual disable-enable in interface and it wake up: 1 2024-08-28 10:32:53 PPP NOTICE [98-25-4A-8E-8D-93]: PPTP Client ******** connected to the server successfully. (Local IP:192.168.2.101, peer:192.168.2.1, DNS1:192.168.2.1, DNS2:192.168.2.1, MTU:1450.) 2 2024-08-28 10:32:50 PPP NOTICE WAN: ******** authenticated. 3 2024-08-28 10:32:50 PPP NOTICE WAN: LCP negotiation succeeded. (MTU=1450, AUTH=mschap2) 4 2024-08-28 10:32:49 PPTP NOTICE WAN: PPTP client began connecting.
- Copy Link
- Report Inappropriate Content
@YuriyB almost every morning i need to disable-enable pptp client in my router.
er605 shows warning and dont retry reconnect
ticket suppport no answer?
This router is highly secure and not reliable in VPN connection
- Copy Link
- Report Inappropriate Content
Oct 02 07:08:25 ER605: 2024-10-02 07:08:25 ppp<5>: [OMADA]WAN2: MPPE disabled: terminating link!
Oct 02 07:08:25 ER605: 2024-10-02 07:08:25 pptp<5>: WAN2: PPTP client failed to connect the server.
Oct 02 07:08:28 ER605: 2024-10-02 07:08:28 ppp<4>: [OMADA]WAN2: LCP sending TERMINAL-REQUEST timeout.
Oct 02 07:08:28 ER605: 2024-10-02 07:08:28 pptp<5>: WAN2: PPTP client was disconnected.
and no PPTP client began connecting. retry
in 90% cases er605 just disconnects and i need manually re-enable tunnel
no matter router work a few weeks or few days.
other 10% er605 WORK LIKE I NEED:
PPTP client began connecting., PPTP client began connecting.,PPTP client began connecting.,PPTP client began connecting....
Like this:
- Copy Link
- Report Inappropriate Content
Today it Reconnected automatically! YES YES YES
- Copy Link
- Report Inappropriate Content
Today log:
It reconnected automatically.
yesterday it just disconnected and no reconnect attemps:
- Copy Link
- Report Inappropriate Content
Again disconnect and no reconnect
- Copy Link
- Report Inappropriate Content
Again PPTP client was disconnected. and no reconnect
manual disable-enable in web interface.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1026
Replies: 19
Voters 0
No one has voted for it yet.