Home

Forums

Stories

Knowledge Base

Business Community > All Threads > Failover only works if you turn off one of the devices

< All Threads

Failover only works if you turn off one of the devices

Paulo_Beeny

2024-09-09 11:22:30 - last edited 2024-09-29 02:06:38

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-09

Failover only works if you turn off one of the devices

2024-09-09 11:22:30 - last edited 2024-09-29 02:06:38

Tags: #Load Balancing

Model: ER605 (TL-R605)

Hardware Version: V2

Firmware Version:

Failover only works when you turn off one of the devices, but not when one of the internet goes down. Companies that provide internet come with a GPON and a router. When the fiber signal in GPON drops, the tp-link router does not activate the backup link, as it identifies that the device is still connected. If I physically turn it off then yes it activates the backup link. Is there any configuration to resolve this?

Remembering that this also happens with other models such as the TL-ER7206.

Thanks in advance for your attention!!!

1 Accepted Solution

Clive_A

2024-09-10 01:56:28 - last edited 2024-09-29 02:06:38

Posts: 5628

Helpful: 2696

Solutions: 1268

Stories: 0

Registered: 2023-06-09

Re:Failover only works if you turn off one of the devices-Solution

2024-09-10 01:56:28 - last edited 2024-09-29 02:06:38

Hi @Paulo_Beeny

Thanks for posting in our business forum.

Explained in this KB: Common Questions About the Load Balancing, Link Backup(Failover) & Online Detection

Note that online detection is based on the reply. As long as the WAN can get the DNS query out and got replied, it'll be considered as online. Regardless of your speed or other problems.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Recommended Solution

Paulo_Beeny

LV1

2024-09-27 21:05:45

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-09

Re:Failover only works if you turn off one of the devices

2024-09-27 21:05:45

@Clive_A


Goodnight!
It worked, that was all.

Now on the Tl-470+ there is no such option, below are the images of how it is configured and what is needed for the failover to work?

On the 470 there is no online detection tab

Clive_A

2024-09-29 02:06:22

Posts: 5628

Helpful: 2696

Solutions: 1268

Stories: 0

Registered: 2023-06-09

Re:Failover only works if you turn off one of the devices

2024-09-29 02:06:22

Hi @Paulo_Beeny

Thanks for posting in our business forum.

Paulo_Beeny wrote

@Clive_A


Goodnight!
It worked, that was all.

Now on the Tl-470+ there is no such option, below are the images of how it is configured and what is needed for the failover to work?

On the 470 there is no online detection tab

That's an update of the software. It becomes more accurate by analyzing the DNS query.

Mostly, the Internet would be down along with the DNS server stops responding the queries.

Paulo_Beeny

2024-09-09 11:22:30 - last edited 2024-09-29 02:06:38

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-09

Information

Helpful: 0

Replies: 3

Failover only works if you turn off one of the devices

Failover only works if you turn off one of the devices

Information

Voters 0

Tags