EAP245 V1 + V3 MESH

EAP245 V1 + V3 MESH

EAP245 V1 + V3 MESH
EAP245 V1 + V3 MESH
2024-10-01 13:20:42 - last edited 2024-10-16 02:05:45
Tags: #Mesh
Model: EAP245  
Hardware Version: V1
Firmware Version: 1.4.0 Build 20180323 Rel. 32551

Hi,

 

I use EAP245 V1 1.4.0 Build 20180323 Rel. 32551

together with EAP245 V1 2.3.1 Build 20191029 Rel. 61589

Seem to work fine finally, wired,  with Omada controller v3.2.17 (costed me some hassle)

Mesh however doesn't work. Do I have to change the setup?

 

Thx for your help in advance

Terry

  0      
  0      
#1
Options
1 Accepted Solution
Re:EAP245 V1 + V3 MESH-Solution
2024-10-03 01:36:58 - last edited 2024-10-16 02:05:45
Hi, yes, EAP245 V1 doesn't support mesh.
Recommended Solution
  0  
  0  
#5
Options
4 Reply
Re:EAP245 V1 + V3 MESH
2024-10-01 16:01:31

  @Terry01 

 

there is no mesh on the EAP245 v1, if you want to mesh, you have to upgrade to something newer

 

 

  0  
  0  
#2
Options
Re:EAP245 V1 + V3 MESH
2024-10-02 03:33:11 - last edited 2024-10-02 03:38:02

 Hi @Terry01 

 

If you want use EAP mesh, please have a look on Omada Mesh compatible list.

As you can see, EAP245 V1 is not in the list.

 

The EAP245 V1 is end-of-life for a long time.

How did you get it?

  0  
  0  
#3
Options
Re:EAP245 V1 + V3 MESH
2024-10-02 08:55:15
Hi Vincent, I bought the V1 back in 2017. Still works fine. But regarding MESH it has no functionality I understand?
  1  
  1  
#4
Options
Re:EAP245 V1 + V3 MESH-Solution
2024-10-03 01:36:58 - last edited 2024-10-16 02:05:45
Hi, yes, EAP245 V1 doesn't support mesh.
Recommended Solution
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 288

Replies: 4

Tags

Related Articles