Good morning, I have an OC200 controller. One network has the video surveillance system, and another physically separate network with 2 switches has the internet system. I can't configure it, an IP address for the video surveillance where it then communicates with all the switches, and one for internet access from where I can then see the controller on the app. To be clear, on the video surveillance network it should have 192.168.193.254/24, and on the internet one it should have 192.168.104.71/24 with gateway 192.168.104.1. The problem is that it only lets me enter the internet side, and I don't know where to put the video surveillance side.