Forums/
WiFi
Yesterday
@junkimchi Make sure to power cycle the AP after disconnecting the PC from the injector to ensure you are testing correctly.
0HELPFULS
Forums/
WiFi
Tuesday
@junkimchi Silly question, but let's get this out of the way...the injector goes in the rear port of the EAP615-wall...test devices should use 1 of the 3 ports along the bottom edge of the AP....
0HELPFULS
Forums/
WiFi
Tuesday
@AAS2online The 215Bridge is part of the Omada family so you can manage and get status via the same OMada controller for the 610's and 225's. Single pane of glass is nice if you can get a pair....
0HELPFULS
Forums/
WiFi
Sunday
@Franz47 think of them more like your ears, you can hear with just one, but you can hear better with both, and even narrow down the direction of the sound. They work together in other words. Often...
0HELPFULS
Forums/
WiFi
Saturday
@Franz47 What you are looking for is unobstructed direct line of sight between the APs, ideally with the antennas in parallel planes to each other. An initial gauge of quality will be the signal...
0HELPFULS
Forums/
Controllers
a week ago
@sathyashankar Loadbalancing, your weights should be 100,30,9 across WAN1,2,3. It is not clear if you are running any of the ISP devices in bridge mode, or if they are in routed mode. Where possible...
0HELPFULS