@PHTP Wall units cannot mesh, so not suitable for wireless-wireless connection of APs. Though I appreciate the thought of using those juicy wired ports and then backhauling them via mesh :). Sadly,...

@Liftboy If you configure the wired 650 as the root, and factory default the other 650 and power it up using JUST the POE injector, then you should be able to adopt it as a meshed unit via the...

I wouldn't, that's too far for the EAP610-outdoor AP's 5.8G radio/antenna system. Even the CPE lineup may have issues at that distance. EDIT -as above Pharos would be a better call.

@Liftboy If a pair of 650-ceiling APs were meshed together, instead of trying to use it as a repeater...ie one wired to switch the other wired to printer, this would work, but requires possibly a...

@janaca Make sure you are running the latest firmware for the EAP615-wall. Keep in mind that the default VLAN for management is VLAN1-untagged, so you will need the switch and AP ports set...

@MinTP Perhaps this is useful? https://www.tp-link.com/ca/support/faq/2713/