@ElvisV If APs hiccup, then clients definitely hiccup. Especially if the client can't tell that the AP has lost its connectivity. Can I suggest you use the controller to assign fixed IP's to each of...

@ElvisV I assume that each AP actually connects directly to the HP switch, and not through the OC300. Does the OC300 connect to a similarly configured (same VLAN) port on the HP switch, or at the...

@Hans1234 Glad you found it! I've chased my fair share of electrical gremlins over the years :)

@ElvisV 2 Questions: 1. firmware revision on OC300 2. what is your router setup (between the 1920 and the internet)?

@Mikel_Alvarez If your APs are Standalone, then this problem should not occur. If you are using an Omada Controller, then the DHCP is defined by the LAN which is assigned to a given SSID, and this is...

@Hans1234 Normally these problems are cable issues. Are you using the exact same cable and port for the test? (if not test is bogus, if yes and you get 1G on other devices, see below) If you use a...