@dunxd Two things to check/try then: 1. Disable 6ghz on SSID definition used for these class of AP 2. Use WPA2 only authentication, ie no WPA3

@GreyWolf_MBRR The AP will get an IP from the Starlink router just like any other device. You should be able to figure out what IP it was assigned via the clients list on the starlink router (I sold...

@mysteriousname I am not sure the stock radios will get you a 300-500m sphere of coverage (or toroid, or frisbee even). You get max 1W of power from the stock radios, if you do the math of 1W over...

@mysteriousname You could modify the internals of the 650, but this will require some rather delicate solder skills to break out the signals. The 625 gives you two standard SMA connectors from the...

@mysteriousname Those radiation graphs are pretty sophisticated, going by shape and/or colour doesn't necessarily tell the whole story. I will admit in general the 650 looks better on paper, but from...

@Roland083 The Fritz box ALSO needs to know about 192.168.20.0/24 subnet as well. Not familiar with Herr Fritz, but if he supports VLANs, then you just need to create the 192.68.20.0/24 subnet on...