@brambil There are also cheaper versions avialable https://www.amazon.ca/IEEE802-3af-Compatible-Waterproof-Additional-Transmission/dp/B0C5WMH9ZD

@brambil Neither the 110 or 110-outdoor can use standard POE (48V), they must be powered by their supplied 24V passive injector, so this should be status quo for you.

@brambil The outdoor version wasn't available when I did it, so I had to put the indoor version in a PVC box. But these devices works great...basically your main switch feeds POE+ to this switch,...

@Entirelynutz Do you have an Omada-controlled switch in your setup? If not, it cannot be done with just the ER605. The SG2008 is the entry level Omada switch that will allow you do create IP specific...

@bonestaak With the Controller, DNS settings not assigned at the WAN port, but be custom set for each LAN subnet that you define. Go set custom DNS IP addresses under Site->Settings->Wired->LAN

@lucianp If the AP model in question supports Mesh, then yes, 1 wired (root) AP can act as an uplink for multiple wirelessly connected APs. Note, you still need to provide power somehow to the remote...