@nordic-style It's probably on the modem end...not liking the force port rate. If you force the UniFi switch to 1G+POE do you still see similar packet loss? If not, then it's some kind of firmware...

@stephanecdu94 Yes, you need to translate your current design into the controller, that includes subnets, VLANs and assigned static IPs. However, it really isn't that much effort, and once done, you...

@tplecko If you have a 7206 or 605v2 with latest firmware you can do LAN-LAN ACLs on the gateway. Not sure about any of the others though.

@MakisFil Omada routers are NAT devices ie 'gateways', not true routers. The answer to your question is no unless you are using an Omada smartswitch, but I think you are asking your question the...

@Daniel604 The advantage of the Docker containers is that if something like this happens you can spin down the new controller container and spin up the old controller. You should take note of the...

@stephanecdu94 Correct, whatever you have defined as your LAN/subnet/SSID in the Controller will override what was previously configured in Standalone mode on the AP.