@VasquezPL Also, please connect your OC200 direct to a LAN port on the ER605 and connect your switch to a second LAN port on the ER605. Do NOT loop all traffic through the 2 ports of the OC200! The...

@VasquezPL You need to program all the revised IP info into your controller BEFORE you adopt anything. Otherwise, controller will reprogram gateway back to 192.168.0.1 and it all melts down again.

@VasquezPL Hello again. As you have noticed, it is bad when the same subnet appears on both sides of the gateway. While you can change the Omada defaults, it is much more work usually than changing...

@ofogao I would not recommend spending money on the Smart switch (has an E suffix) device unless you know why you might want or need to. Your existing cable modem already has 4 yellow LAN ports you...

@Bebe1980 https://static.tp-link.com/upload/firmware/2024/202402/20240204/Release%20note.pdf From here https://www.tp-link.com/en/support/download/eap110-outdoor/v3/

@ofogao You need the SG-108PE switch to support POE. If you cannot return the 108E, then you will need a POE injector which is compatible to power the 610 AP.