I recently purchased an Archer A7 and replaced my Linksys WRT1900AC for no reason other than I wanted to try out the Archer A7. I noticed immediately that I only get about 1/2 the 5ghz speed wth the...

@piaakit I am using one EAP610 Outdoor with four EAP225 Outdoor. Yes they will work in Mesh mode. You will need a controller but it does not have to be the hardware controller. You can use the...

@Fae Overview and Statistics should be visible simultaneously. See attached GIF. In the actual interface, if you expand one the other retracts and you have to switch between the two, despite there...

@Fae I would like to expand the question on the disassociation feature. Lets say for example I have an AP in the Mesh that is accumulating to many clients. 3 of these clients have signals of -78, -80...

Here is a diagram showing my current setup and planned setup, with the "?" Indicating the device I need help deciding on. The POE devices are 48 volt. I would prefer the switch to be Omada compatible...

@KimcheeGUN Thanks. Will do that. I already have RSSI Threshold set at -76 because I was seeing -80 clients on AP #1, when they were nearer to, and getting better RSSI, on AP #2. I also set a client...