@BrianQ81 Yes, there is a misunderstanding. From your initial post and your configuration snapshots, I constructed the following diagram: Today’s configuration snapshots of the SG1016PE are...

@BrianQ81 If I have read everything correctly, I see various problems with your configuration: 1. If port 8 of the SG108PE is connected to port 16 of the SG1016PE, then port 8 of the SG108PE must be...

@BrianQ81 To better understand your problem, let me ask "What are you trying to achieve with VLAN2?". Normally switch-to-switch connections are trunk ports.

@Clive_A I have solved the issue! Here is what needs to be done in case someone else runs into the same problem. 1. Ensure the only interface is the management vlan interface. In this case the switch...

@Clive_A Thank-you for responding. Perhaps the adding of a management vlan in standalone mode along with L3 accessibility should be considered as feature requests and be incorporated in future...

@Clive_A The link you provided did not help. Let's see if I can explain this a little better so that you understand what I am trying to do. I have a primary network and a management network...