I am looking for a router that can do network segmentation "out of the box" without the need for any external devices. The reason behind this is to fully isolate two home networks while only using a...

@woozle I just tested the issue on one of my AX55 routers that uses the 1.3.2 firmware. Using a PC and a laptop, I put the laptop in the isolated devices list. If both are connected to the 5G network...

@Dave_G_99 You say that you expanded the DHCP scope by changing the DHCP subnet mask. Did you also change the subnet mask in the LAN settings? Until you get everything working smoothly again, I would...

@Evil1nside I have AX55 routers here but the EasyMesh setup procedure is the same. If you do a factory reset of the satellite router, it should default to using a Dynamic IP on its WAN port. During...

@woozle I have been contemplating the purchase of an AXE75 but your post has postponed my decision. As you are what I consider a very "savvy" contributor to the forum, then surely there must be a...

@Kali777 From my experience, you don't need to add the switch MAC to the VPN clients list. The laptop should appear in the connected clients list along with its MAC addresss so adding it to the VPN...