@Dipsy What's the DAC cable you use in this context? Specify the diagram of the network and the connection now. In simple terms, you upgraded the 1.3.2, and the ports' status will become inactive,...

@ZoloNN SD-WAN is down, so one of the sites as the Hub could be down. I assume. I don't have a diagram of your network. I cannot pinpoint if it is a scheme issue. You can use this thought and...

Hi @Darin01 Seems to be a problem with your config. You have to set a group of devices and their IP addresses to the bandwidth control instead of setting the AP IP address. That's not how it works....

@Nani88888 Nani88888 wrote @Clive_A Hi， I have tried connect my computer by wire to ER7212PC directly to Port No.5. Before testing， I reset the windows data monitor and create a new local user with...

@AliReza_A AliReza_A wrote @AliReza_A update: the weird behavior continues, but at least there is hope: After trying again wih yet another port, the SFP transceiver showed up and I was able to use it...

@FullBandwidth If you do not experience an issue in the real environment, it could be a visual error. Try to upgrade your firmware and check this again....