Very often the simple things. Removed and reconnected the HDMI cable and all is well. Thanks

H500 and generic HDI monitor been working perfectly for several months. The HDMI monitor is turned off at night (on/Off switch) and On in the morning. This has worked perfectly for months. 4 cameras...

@Sheepless I think I comply with all the points in that article. The light bulbs controlled are 2 x L530 and 1 x L510. I also have a smart plug P100 that has an On and an OFF automation. Again both...

Using TAPO S200B V 1.0, Firmware 1.112.09 BUild 231121 I have two automations controlled by one S200B button. Single click turns three lights on. Double click turns the same three lights off. The ON...

@Solla-topee Many thanks for your time. I have been playing, naturally, to try to resolve this. The only difference in the left right and right left was that the right left first approaches the...

C720 with Verhicle detection via a preset zone. Zone covers about half the screen. Set up to detect vehicles entering or leaving a drive. During daylight operations vehicles are detected in either...