* Are you sure the port you've configured the vlan on has access to that vlan? * Check if you set the bcast big enough on you're client device and try to be in the same subnet as your switch to avoid...

Model : TL-SG105E Hardware Version : v1 Firmware Version : 1.03 build 20141016 rel 49580 ISP : For some reason when I set vlan untagged ports 2-4 to 200 and pvid to 200 ports 2-4, it still gets an...

For some reason it worked again after I changed the port (4) from GENERAL to TRUNK and right after that I changed it back to GENERAL and now it works?

I did follow those instructions yet it's not working as expected. [CODE]16:26:26.210111 IP 192.168.1.31.57582 > 10.13.30.10.7442: Flags [S], seq 3503129506, win 14600, options [mss 1460,sackOK,TS val...

I did follow those instructions yet it's not working as expected.

I've already followed that guide yet it doesn't work as it should. 16:27:11.325339 IP 10.13.30.1.67 > 10.13.30.21.68: BOOTP/DHCP, Reply, length 300 16:27:14.363009 IP 0.0.0.0.68 > 255.255.255.255.67:...