5500 MHz is channel 100, 5600 MHz is channel 120, both are in the U-NII subband 2. You can find it either in test mode of v1.1 devices or if you set a region which allows use of U-NII-2 such as, for...

Only external antennas used with WBS510 have mounting brackets. The CPEs are mounted on an antenna pole using UV-persistent cable ties included in the box. Also, adapters for 24 volts passive PoE are...

Unfortunately nothing changed in font size and also not for the CPE210 spectrum analyzer (mostly unusable for std 2.4 GHz due to extended frequency band w/o band selection as in CPE510).

You will hardly find a way to exceed 200 meters distance with standard client devices (laptops, tablets, smart phones). Long-range APs can distribute signals much further, but client device's...

There seems to be a new Pharos device in the pipeline: the CPE610 5GHz 300Mbps 23dBi Outdoor CPE. Looks pretty much like Ubiquiti's LiteBeam: AP is built into the antenna feed: Nice! :D BTW: a new...

Support wrote So my question is, is there a way to allow DHCP requests from the Client through Interface 2 using vlan101? AFAIK the AC500 can't supply DHCP addresses to clients over VLANs. It can...