@Torsten23 Goto switch in Omada controller select port and then edit and select profile override

@Torsten23 If you only get 100Mbps on a new cable, it seems that there is a fault with the EAP, But try locking the port to 1000Mbps go to switch, ports, select the port you want to change pres edit,...

@Torsten23 Ok, so if you are 100% sure that the cable is ok then there is probably something wrong with your device, so I would replace it with another one. You can also try to force to 1000Mbps on...

@Torsten23 it sounds like a cable fault, try connecting the EAP to the switch with a shorter cable to test, if it's ok it should show 1000 MBps Use a standard rj45 patch cable to test .

@Hank21 ok, isn't that a bit strange? what does tp-link think, ok let's make the menus so that it looks like it's there in the controller and stand alone, we can also let it work a bit, let phase1...

@Fae or somebody from TP-LINK OpenVPN/SSL VPN not working. OpenVPN Client connects server but no data goes through OpenVPN Server does not work, gets connected but no data. this also destroys Site to...