@aspirinus Hi, thank you very much for the feedback. Please try a hard reset by holding reset button for about 10s, then reconfigure the AP mode and wireless settings. After that, please test if the...

@Alby_905 Hi, for powerline extenders, please use tpPLC App instead of Tether App. And for the WiFi name, if you would like to customize it, please refer to this guide: How can I copy the wireless...

@Bluebottle03 Hi, thanks a lot for the sharing. By the way, by "blinking red/green LED", do you mean power LED or powerline LED?

@SonoMolly Hi, do you mean the LAN negotiation speed between the powerline adapter and your router LAN port is always 100Mbps? Upon checking, the Ethernet port on the powerline is a Gigabit Ethernet...

@TheChaosDruid Hi, please confirm if all the three powerline extenders use the same WiFi network name, you could also try to power on one extender at a time and check if you could see the WiFi one by...

@Hellohelp Hi, please refer to this guide to set up the VoIP on web interface: How to setup my VoIP function on VoIP Modem Router