@AnonyOne For your information, the Deco supports WPA/WPA2 mixed by default; for those devices which support WPA2, it will choose the more secured encryption - WPA2 automatically; and there is no...

@frederikk Hello, when Deco units work in access point mode and connected to the switch by ethernet cable directly, the packets which need go to the WAN side will be forwarded to the gateway...

@Cavemanrik Hello, it is up to you; You can configure the Deco M9 plus as a regular router or an access point to work with the current main router. Both operation modes support mesh network. 1. If...

@Hisham_A No, you do not have to put each slave Deco in the wifi range of the main Deco; instead, the slave Deco can connect with another slave Deco to boost wifi signal. In other words, they can be...

@PDM Hello, you can use Deco to boost wifi signal and connect one Deco to the VM smart hub by ethernet cable. Except the main Deco needs connect to the router by wired cable, the satellites can...

@Mick12 Hello, we will do some troubleshooting first to locate the issue so that we can try to fix it later. 1. What is the current network diagram? 2. When Deco turns red and disconnects from...