@Colin1963 Hi, thank you very much for your time and patience. I didn't have any other suggestions so far, and would like to follow up on your case via email and ask the senior engineer for further...

@pdecaro Hi, welcome to the community. Have you tried to set the 2.4GHz channel to 11, channel width to 20Mhz, WPA2 only security, then check again whether the Shelly Plus 1PM and an IMOU Ranger...

@Lorenz_Italy Hi, you have found one more suspending issue on some of the 5G routers. You can view the following discussion here: MR600 V2 & Wireless Schedule. Bug? MR600 WiFI schedule issue 5G...

@Elsasser Bonjour. Using more BE68/BE85 as the satellite units would surely increase the Mesh speed around, compared to satelllite Deco M9 Plus. If you're worried about the 2.4GHz smart devices, have...

@Tomsonic41 Hi, Access point is not the only choice. It is often recommended because it simplifies the network topology, leaving only one NAT/DHCP server so that all the LAN devices are under the...

@Da_Ren_99 Hi, thank you very much for the feedback. Deco supports WAN/LAN Auto-sensing. If the main Deco can't receive a valid IP address from the front modem, it can't decide which one is the WAN...