@HmmmUK Hi, 1. The PIR sensor works by detecting infrared radiation emitted by or reflected from object, so the vehicles out of the detection zone can be detected by the PIR sensor and then wake up...

@Maynard_Rowley Hi, When the Video Mode on the camera's Live View page is set to Auto, the camera will switch mode between Day mode and Night mode according to the light conditions of the monitoring...

@BottleTiger Hi, Thank you for the information provided. I have reported the issue to the tech team, and they will likely reach out to you via email to continue troubleshooting your case. Please...

@spaceman5 Hi, The feature to send a single image from the camera to a specified email address is not available on the Tapo camera, and your usage scenario can't be achieved via the Smart Action...

@Elgranti Hi, This usage scenario can be achieved via the Smart Action>Automation feature. How to create Smart Action (automation or a shortcut) of my Tapo devices? For example, when you add a new...

@Blumed Hi, You can refer to the following steps to have a try. 1. With the camera powered on, press and hold the WPS/Reset button (for more than 5 seconds) until the System LED turns off. Then...