Dear @martyw96, In the end, my issue was that I had maxstream enabled and so I was unable to connect to the WiFi. Thank you for your feedback. That makes sense. MAXtream is only available on Pharos...

Dear @EternuS, Try the points below and check if it helps. 1. With the switch powered on, please use a pin to press and hold the reset hole for about 8-10 seconds to factory reset the switch, you...

Dear @laboratorio101, - Do I have to reach each of the T1600G-28TS and change their IPs to manage them individually, without causing conflicts TP-Link switches all use 192.168.0.1 in default...

Dear @M.Ed, Please upgrade the firmware first, the latest firmware version is Build 20200313. https://www.tp-link.com/support/download/tl-r600vpn/#Firmware

Dear @BrandiO, I was semi-successful once it was connected to the computer but I was under the impression it could be connected straight to the router once configured? If you configured the CPE210 in...

Dear @martyw96, I have tried setting one up as an Access point and the other as a Client but this doesn't seem to work - can't get internet? What mode should I use? The setup should be like this:...