@Omae1 It's pointed in the guide, that you should have your VR600 in the same subnet as your main router ? What's the main router IP address ? Also you've set the VR600: It is recommended to use 24...

@AndyRoudy Check your negotiated LAN port speed here: If any of the LAN ports have 100mbps then that's the bottleneck you're experiencing. Try replacing the cable with another one Cat 5E/6 or use...

@A-O Your device is VR900 and you have upgraded to this beta FW, which is recommended for a better experience.

@Peterwright Maybe after the reset (as mentioned) the hub is back in router mode, why don't you try to access it on 192.168.0.1 instead. Check this thread - may be of help:...

@Onavi If you haven't changed anything on your PC, where the Soulseek is installed, then just replicating NAT-forwarding rules from your old router to the C6 should suffice. Just make sure the C6...

@Martin_Vitek Follow this guide to determine your router's IP address while you're connected to your router by wire or wirelessly. When you've fond it just use it in your browser to open the...