@JordiRisa It could be a FW glitch but since LAN4 doesn't behave similar it may not be the case. Why would be ridiculous to use 10-meter CAt5E cable, I even use longer of these without any issues.-...

@JordiRisa You can't change the LAN negotiotion speed. What you can do as a test would be changing the ethernet cables (with CAT 5E for example) or use another router's LAN port to test the...

@MadK9 The MAC addresses of the router should be persistent and they are printed on its bottom sticker. If you have an ISP GPON router you may try to configure Easumesh with both C64 in AP mode to...

@CptBill There's a limit of devices that can be connected to a wireless devices which is hardcoded in its FW. Most probably, in your case that number is 32 and you can't change that from the device...

@Ali_ahmed11 Go through this guide for optimizing the router wireless speed and performance.

@MadK9 Based on your description, that seems like a HW issue with the device. Either contact your local support to be advised further or buy a new one.