@Krotex From your description it seems taht your PLC went faulty. Contact your local support to be get help on this issue.

@Megano If you reset the RE to its factory defauls, use the WPS method for pairing with your router. When paired the wi-fi password would be the same as your router. The default username/password is...

@CaptainSkeleton This means that the NAS is connected at 1000 mbps. on the R5 LAN port. Does the NAS get an IP address from R5 ? Do you have access to the NAS from other devices on your network ? If...

@Celestin6669 As you can see there is a little interest even from users that upvoted this feature request. Why would TP-Link bother to make an effort on this for only 17 people. Things get worse when...

@AYHD On the support website there's an explanation for the device HW version numbers: (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) How to find the hardware...

@Saikofreak EB810v is an ISP provided device. It most probably has a customized firmware for that reason and it's not supported by the community. Your best bet is to interact with your ISP about this...