@scattagain TL-WR841N in AP mode (Case 1) should not cause any bandwidth drop to your main router. You'll get the best bandwidth when TL-WR841N is in AP mode. If bandwidth drop is observed only on...

@aboninski No, their LAN ports would work as a plain network switch for wired devices.

@aboninski Just set both AX53 in AP mode (Case 1) and their SSIDs the same. Both AX53 DHCP server should be turned off.

@MVH10 The idea is that tpPLC utility to find the new device through the powerline network. Try this troubleshooting video and check if that helps to find the problem. If you still experincing this...

@LSchio Here's what this status means: Try resetting the RE again by pressing the reset button (you should feel/hear a click) for about 10 seconds. If that doesn't work and your RE is still under...

@Roidsy If you're trying to configure Windows ICS - you may try this solution.