@JCHH It sounds like an IP address conflict - what's the Deco WAN IP address when you switch to router mode ? WAN and LAN IP address can't be within the same subnet. Here's how to change the Deco LAN...

@SlySly So the IP address that devices received from AX23 are within its DHCP server IP pool, but are not the ones you've set into the Address Reservation table ? Are these IP addresses (set into the...

@VenDimitrov When building EasyMesh the satellite device just has to be reset to its factory defaults before adding it through the main router - here's a video guide.

@sujayvb Open the RE300 support page - here. Scroll down and there you should see a setup video guides for a different scenarios - pick the one that suits your needs.

@MortenB I would recommend to replace the A5 with a C80 or C64 (both gigabit routers supporting EasyMesh ethernet backhaul). EasyMesh support in AP mode is planned and eventually will be implemented...

@SlySly Here's a guide for configuring Address Reservation on your router. If your DHCP server IP address pool is from 192.168.1.100 to 192.168.1.249 (for example), make sure that IP addresses that...