@Red-Tp How old is your router ? This could be a potential issue with the router battery. Check this FAQ - Q6-Q9.

@Paul339 Depending on your RE model you could try 192.168.0.254 as well. If you want to reset your RE the easiest way is to use its RESET button - usually it's left to the ethernet port. Press for...

@pajtaz In this case the Remote Management configuration has nothing to do with WebGUI access. What you can do is to connect ER605 to WDR3600 WAN port and set its IP address 192.168.0.2 (static)....

@Bonesoul It depends on how precise you want to measure that. For example: You could use a free apps like Wi-Fi Analyzer to see the signal levels in the negative dBm values and OOKLA's Speedtest app...

@uttamsolanki If you forgot the login password for the extender you'll need to reset it to factory defaults and reconfigure again: With the extender powered on, use a pin to press the RESET button...

@IanDo If you're trying to configure an IPSec tunnel between your VR2100, here's how. If you want to route all the traffic through a VPN server, i.e. accessing the internet by using the VPN Server as...