@JamesC The possibility that two devices in a row are deffective is very low. To locate where the issue is, you can: 1. Use another good quality ethernet cable to connect your PC to MR500 LAN port...

@ChadL That's because ESP32CAM supports http, but not https video stream. In this particular case you should use another external port like 81 or other than 443 and open the stream with:...

@Amogh_R Yes, they all do - that's their ethernet port could be used for. See here how you can compare different Deco models. Here's a guide on how to configure the Deco ethernet backhaul.

@Amogh_R Read through this thread - it includes a video guide for setting up and the device list that currently supports EasyMesh. However, keep in mind that EasyMesh supports ethernet backhaul...

@Inta Unfortunately not, this model is not officially supported and the only source of a new FW release could be the ISP you've obtained the router from. Here's an example from TPG community -...

@Inta Yes, there's a guide on how to configure WDS feature for xDSL routers here. You can use also the VR1600v user guide - here - Appendix: Troubleshooting - T6 How to use the WDS Bridging function...