@kingshin No, I have Archer C64, which has this option already implemented. Disabling this option allows a remote access to the second device (wether in AP/Router mode), which is behind your main...

@ALL_SYS_PWRGD I doubt that this is a HW problem, but it could be a FW issue. If it's working for you this way, keep it as it is. In fact you're not gaining anything if the SSIDs of VR600 and your...

@VictoLia For the topology (ISP Modem LAN port <=> Archer c64 WAN port) if you see your ISP modem's IP address as a gateway, you should have set C64 in 'AP mode'. Is that correct ? In general the...

@Alexrj You may contact your ISP to confirm if your device is with the latest FW they have - check this thread. The OP has a later FW version on his device. If your FW is a genuine TP-Link's FW, you...

@VictoLia Disconnect C64 from any other devices and connect your PC/laptop via C64 wireless SSID - printed on the bottom sticker (as well as its password). After you connected, use this guide to...

@Alexrj Since VX220-G2v doesn't support DFS channels, if you want to use 80MHz width, set the 5GHz band wireless channel to 36 and test if that works for you. You can browse through this story to see...