@mart0s If you start typing C54 in the model field it should appear in the list as bellow: Then you should be able to select C54 and continue.

@Creedence In both cases 1 & 2 changes should be made only on C9 - not on the ISP router. You could probably use C9 as it is (without reconfiguring), but you'll introduce a double NAT in your...

@mweber Have you rebooted the router after disabling UPnP ? If you did and nothing else helps you may contact your local support and provide the information they require (including a link to this...

@healme Upon successful reset: you have two options: 1. Connect a computer with an ethernet cable to the AX10 LAN port and login with the default credentials admin/admin. 2. Connect to AX10 via Wi-Fi...

@Creedence That's because only Archer C9 v5 has an operation mode menu with an Access Point option. If you really have Archer C9 v1 then you should use Case 2 from the guide I posted in my first...

@mart0s It would be better to create a feature request in the approriate community section in terms of visibility and relevance: