@MotazAlia There's two options in your case and keep your existing VR600: 1. Keep VR600 in DSL modem router mode and set Deco in AP mode. 2. Set VR600 in bridge mode and use the Deco as a main...

@Israel89 You can't have two routers in OneMesh - check OneMesh FAQ - Q8/A8 and Q10/A10. You can have C80 in AP mode (Case 1), connected to AX72 with an ethernet cable.

@Creedence USB Sharing should be available in AP mode too - check this FAQ. Here's a guide on USB Sharing configuration. Depending on your HW version, Archer C9 may or may not have an Access Point...

@Polarius Check this thread - AX73 doesn't seem to support Print Server feature, probably a typo in the FAQ.

@jtb_id If you want to connect a standard ethernet cable from your ISP modem to the TL-WR841HP then you should re-configure TL-WR841HP in AP mode (Case 1). In this scenario you'd have more stable...

@dresoccer4 According to its specifications AXE75 has got 1x gigabit WAN port. That means whatever category ethernet cable you connect to its WAN port (Cat5E, CAT6, CAT7, CAT8) the throughput would...