@Errefae Yes, it has - check the specs here. And yes, this topology should work. Just FYI a pfSense box with dual WAN ports should do the job as well.

@RokK You can't connect two routers in OneMesh - check this FAQ - Q5/A5 and Q10/A10. But you could use the second AX72 in AP mode (Case 1) and have two separate wireless networks, even with the same...

@DrFrank Here's a guide on how to configure and bind your TP-Link ID to your router. Here's a troubleshooting guide for the TP-Link cloud service. Also you can browse through this thread to check if...

@Claudiu_Manda93 Since you can't use your ISP router in modem only mode, you could use your AX53 in AP mode (Case 1). Thus you'll avoid the double NAT in your network, which could be the source of...

@Gyov25 To use WDS feature it has to be implemented in the devices's FW. Usually these settings are located in Advanced > System Tools > System Parameters for newer devices - here's the guide. If WDS...

@Hari_vp Well, you can always use the device in AP mode (if your infrastructure allows this) - it involves just re-configuring the device. This way you would have more stable and faster connection to...