@FleetFoot You have two choices to configure TD-W8970 in your network avoiding double NAT: 1. WDS. 2. AP mode (Case 2). Keep the TD-W8970 in ADSL Modem Router Mode when you configure it. I would...

@Thirith Test it as it is and see if the wireless connections are more stable this way. The benefit of naming the SSIDs differently is that you'll know at any moment where a particular device is...

@iwiwiw USB Printer Sharing is only available for PC and Mac - here's the guide for C2300.

@Arun_Rawat Try resetting the router to its factory defaults to see if that can resolve the issue. Press and hold the reset button for more than 5 seconds (use toothpick or paperclip):

@Thirith Sometimes disabling Smart Connect feature improves your wireless experience like in your case. There's nothing wrong to have two SSIDs - one for 2.4GHz band and one for 5GHz band. What I...

@SaiGer To be able to receive IP addresses on VLANs other than the default VLAN 1, your router should be VLAN capable. I don't believe that Bell Home Hub 3000 is VLANs capable device. Here are some...