@LukasKarlik That's weird indeed. This is a pretty standard configuration to be misconfigured. Which router you're rebooting to fix the issue - EC230 or C6 ? I noticed that your EC230 DHCP server...

@LukasKarlik When the issue happens (and connected to C6) try observing the C6 network and ethernet port status: Connect to EC230 and observe the same parameters there too. It sounds to me like...

@unconnected Try switching this option if you have it in your WR940N web interface and test: If this doesn't help or you don't have this option at all I would recommend to use the WR940N 'Access...

@Rockyuk If you use PPPoE connection in your VR600 what I would do is to configure VR600 in bridge mode. Then connect its LAN 1 port to the pfSense WAN port and setup the PPPoE session in the pfSense...

@vlsi88 Here's how to set 841N in AP mode. LAN IP address should be in the same subnet as the Internet router. 841N DHCP server should be disabled in AP mode. When in AP mode 841N doesn't have...

@Ondulado One more thing shoud be considered here - there are two variants of 841N - with/without dedicated AP mode (Case 1/Case 2). To be sure that your setup is optimal and exclude any...