@impneeraj You should use this guide for configuring the WR845N in RE mode. Make sure you're placing the WR845N according to the step 5 in the guide.

@ukmartian I would backup the Deco M4 settings as they are now and then try to set it up in AP mode - that's a way to restore the current configuration of your M4 if anything goes wrong. If you...

@ukmartian You could try setting your VM Hub 3 in router mode and use the Deco M4 in AP mode, to check if that will make any difference. Once VM Hub 3 in router mode you could turn off its wi-fi to...

@TCDoe This is the guide you should use for building WDS with Archer C7 v2. When building a WDS you should bare in mind that: "In order to build a successful WDS connection between different devices,...

@JLi Yes, you could do that when these devices are connected via switch to your X90. When connected directly or through a switch they can be identified by their MAC addresses. For Internet access...

@RouterMeter Did you try the setting from the screenshot ? Is there any error message when configuring these settings or they are successfully configured but the result is not satisfactory ? Apart...